Advanced Bionics Naida CI Q90 Instructions For Use Manual page 6

Hide thumbs Also See for Naida CI Q90:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
The Naída CI sound processor and accessories should
be used in accordance with the electromagnetic
compatibility (EMC) information provided in the
'Guidance and Manufacturer's Declaration' section of
this Instructions for Use.
Only use the charger provided for charging AB PowerCel™
batteries. DO NOT use it to charge other batteries. Do not
try to charge PowerCels* using a charger other than the
one provided by Advanced Bionics.
Remove batteries from your sound processor when they
are drained to prevent damage from possible leaking.
Do not expose any part of the Naída CI sound
processor or accessories to extreme heat, such as an
oven, microwave or hair dryer.
Do not use your AB myPilot or ComPilot accessories
when instructed not to use wireless electronic devices,
such as on airplanes.
The AB myPilot should not come within 1 cm (1/2") of
the Naída CI processor while stimulating the implant.
Doing so could cause the implant and sound processor
to lose lock. If this happens, power down the processor
and re-power on (done by disengaging the battery and
reattaching).
The digitally-coded, inductive transmission
technology used in this device is extremely reliable
and experiences virtually no interference from other
devices. It should be noted, however, that when
operating the device near a computer terminal or
other strong electromagnetic fields, it may be neces-
sary to be at least 60 cm (24") away to ensure proper
operation. If the Naída CI does not respond to the
implant device because of an unusual field distur-
bance, move away from the disturbing field.
* PowerCels refer to both PowerCels and PowerCel Minis unless otherwise noted
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ci-5280

Table of Contents