Table of Contents
Advertisement
Installing LAN Adapter Drivers
The following sections include special driver installation instructions for LAN
adapters used in your system.
Driver Installation for the Intel PRO/100+ LAN Adapter
The PRO/100+ driver will be installed during the installation of Windows NT,
see "Installing Microsoft Windows
chapter.
Use the following procedure to install the LAN adapter driver on your server:
1. During the Windows NT installation when the dialog box displaying the
message "To have setup search for a Network Adapter, click Start Search
button" opens. Click "Select from List".
2. In the "Select Network Adapter" dialog box 1, Click "Have Disk". The
"Insert Disk" dialog box opens.
3. Insert the floppy disk named "Windows NT 4.0 OEM-DISK #2" into the
floppy disk drive.
4. Enter "A:\I559" and click on [OK].
5. The "Select OEM Option" dialog box opens.
Select "Intel(R) PRO Adapter" and click on [OK].
6. Click on [NEXT].
7. You may need to specify network information depending on the protocol
you use. Follow the message on the screen to continue the Windows NT
installation.
3-4 Installing and Configuring Windows NT 4.0
®
NT 4.0 Operating System" earlier in this
Advertisement
Table of Contents
