During Conversation; The Caller List - Southwestern Bell Freedom Phone GH4000 Owner's Manual

TROUBLESHOOTING
Problem
Caller's voice is too low.
Conversation is
interrupted frequently.
Or
Static noise is present

during conversation.

Handset does not display
any Caller ID messages.
Unit is not receiving Call
Waiting Caller ID calls.
Telephone numbers are
not dia led correctly from

the caller list.

30
Suggestion
Set the button on the handset to a
higher level.
Move closer to the base.
Make sure the base antenna i s in the
upright position.
Check with your local telephone company
to make sure Call Waiting Caller ID service
is being provided on your telephone line.
If you pick up the telephone before the first
complete ring,the caller infrmation will
not be completely received.
See suggestions in the "Handset does not
ring"section.
Make sure you have subscribed to Call
Waiting,Caller ID,and Call Waiting Caller
ID service from your local telephone
company.
The Caller ID data may have been affected
by temporary noise or line conditions.In
these cases,you may see the incorrect
information on the display,such as NO
CALLERID,BLOCKED.a blank screen,
only the telephone number, or only the
name.
Make sure you have set your local area
code.
Make sure the displayed telephone number
reflects the correct dialing situation(i.e"1"
before area code).