Southwestern Bell Freedom Phone GH4000 Owner's Manual page 22

TELEPHONE OPERATION
Call Transfer/Forward
Call Transfer/Forward -
Handset
A n i n c o m i n g c a l l c a n b e
transferred or forwarded to the
other handset during an ongoing
call. when the call is transferred,
the first handset waits for the other
t o a n s w e r b e f o r e c l o s i n g i t s
connection, but when the call is
forwarded, the first handset closes
its connection immediately.
T h e c a l l i s t r a n s f e r r e d b y
pressing the
1. INT key (the external call is put
on hold).
2. Select local handset number in
menu.
3. TALK, or placing the handset in
the charger after the other handset
has answered.
The call is forwarded by pressing
the.
1. INT key (external call is put on
hold).
2. Select local handset number in
menu.
3. TALK, or placing the handset in
the charger without waiting for the
answer.
Call Back - Handset
1.After call forwarding a call back
is generated in the forwarding
handset if the forwarded call is not
22
answered within a timeout of 30
s e c o n d s . I f t h e r e i s n o C I D
information available 'Call back' is
shown in the display; otherwise
normal CID information is shown.
2.If the returned call isn't answered
within 20 seconds, the phone
automatically goes on hook.
Conference
I t i s p o s s i b l e t o e s t a b l i s h a
conference between two handsets
and the external line.
Only the first handset connected to
the external line is allowed to
transmit DTMF digits to the line. If
digit keys are pressed on the
second, they are blocked in the
base station.
Conference Establishment -
Handset
1 . I f a n o t h e r h a n d s e t h a s a
connection to the external line, and
a n o t h e r h a n d s e t h o o k s o f f , a
c o n f e r e n c e i s i m m e d i a t e l y
e s t a b l i s h e d . A l s o R E D I A L i s
treated as a hook off in this case.
2.Only the first handset connected
to the external line is allowed to
transmit DTMF digits to the line. If
digit keys are pressed on the
second handset, they are blocked in
the base station.
3 . I f a h a n d s e t h a s a n a c t i v e
connection (internal or external)
and another connection on hold, it
i s p o s s i b l e t o e s t a b l i s h a
conference by pressing a long INT
key.
4.The conference is stopped if the