Call Waiting; Microphone Mute - Southwestern Bell Freedom Phone GH4000 Owner's Manual

TELEPHONE OPERATION
TALK key is pressed on either
handset.
5 . T h e c o n n e c t i o n c o n t i n u e s
between the remaining handset and
the external party.

Call Waiting

Call waiting on intercom -
Handset
1.If the handsets are engaged in an
internal connection and an external
incoming call arrives, the users are
notified about this by a beep in the
earpiece. The identity of the caller
is presented in the display in the
same way as a normal external call.
The waiting call can be answered
by pressing the TALK key on either
handset. The internal connection is
disconnected automatically. If the
waiting call is not answered, the
display presentation will return
b a c k t o n o r m a l o n g o i n g c a l l
presentation after 15 seconds.
2.It is possible to disconnect the
i n t e r n a l c o n n e c t i o n w i t h o u t
answering the waiting call by a
long INT key press.
C a l l w a i t i n g o n s e c o n d
external call - Handset
1.The user may connect to a second
external call by switching in the
CO. The user is notified about
this by an alert in the speaker.
2.The waiting call can be answered
b y p r e s s i n g t h e F L A S H k e y .
FLASH clears the second line in
the display. If the waiting call is
n o t a n s w e r e d , t h e d i s p l a y
presentation will return back to
normal ongoing call presentation
after 15 seconds.
Redial
The last external called number is
redialed by pressing REDIAL key
in the idle state (Redial to 24 digits
max.). REDIAL number of each
handset is independent of each
other.
Flash
During an ongoing call, a flash is
g e n e r a t e d o n t h e l i n e w h e n
pressing FLASH key. (Press Flash
key during in use mode will not
reset the Timer).

Microphone Mute

Mute - Handset
1 . I t i s p o s s i b l e t o m u t e t h e
microphone during a conversation
by pressing the DELETE/MUTE
key. The microphone is un-muted
by pressing the DELETE/MUTE
key again.
2.In case the external line is muted,
when establishing an internal
connection, the line is un-muted
automatically after the internal call
is terminated.
3.The line is also un-muted after a
flash (register recall) or after a call
is ended.
4.A text message in the display
indicates the mute status.
23