Unlocking The Keypad; Key Click; Key Lock - Southwestern Bell Freedom Phone GH4000 Owner's Manual

HANDSET MENU AND PROGRAMMING
display shows the actual setting, i.e.
auto answer is activated with the
display text "ON".
5.Press PROG, to confirm the
setting.

Key Click

When the key click option is
enabled any key press generates a
key click sound in the buzzer,
except when the keypad is locked.
The key click option is configured
by pressing.
1.Press PROG
2.Press the DOWN key six times.
3.Press PROG, to enter the key
click sub-menu.
4.Enable key click by pressing 1 or
UP, or disable key click by pressing
the 0 or DOWN key.
5.Press PROG, to confirm the
setting.

Key lock

Locking the keypad
It is possible to lock the handset
keypad. The key lock function is
set/reset by.
1.Press PROG.
2) Press the DOWN key seven
times.
3) Press PROG, to enter the key
lock sub-menu.
4) Enable key lock by pressing 1 or
UP, or disable key lock by pressing
the 0 or DOWN key.
5) Press PROG, to confirm the
setting. If ON was selected, the
phone locks the keypad and returns
to idle. A "key locked" status is
shown in the display during idle.

Unlocking the keypad

1.Presentation when the keypad is
locked.
2.While keys are locked, pressing
any key, a help message is shown:
3.The message will time out after 5
seconds.
4.To unlock the keypad press the
key sequence '1','5','9'.
5.It is still possible to dial an
emergency call when the keypad is
locked by pressing first TALK and
t h e n t h e e m e rg e n c y n u m b e r
(000,110,112,119,911,999). Only
post-dial is possible in this case.
Key lock is disabled after an
emergency call.
17