Handset Menu And Programming - Southwestern Bell Freedom Phone GH4000 Owner's Manual

HANDSET MENU AND PROGRAMMING

The menu key functions are.
1.Press PROG key to enter the
menu.
2.Use the UP/DOWN keys to scroll
t h r o u g h t h e m e n u i t e m s . B y
pressing DOWN at the last menu
item scrolls the menu to the first,
and by pressing UP at the first
menu item scrolls to the last item.
The UP/DOWN keys include auto
repeat when held down.
3.Press CANCEL to step back one
level in the menu (returns to idle
when being in the first level of the
menu).
4.Press PROG to choose the menu
item shown in the first line of the
display.
5.Enter setting/level number. Key
click is played only after a valid
setting/level number.
6 . C o n f i r m s e t t i n g / l e v e l b y
p r e s s i n g t h e P R O G k e y . T h e
handset automatically returns to
the previous menu level.
Audio Volume
Audio volume is adjusted by the
following key sequence
1.Press PROG
2.Press the DOWN key two times.
3.Press PROG, to enter the volume
sub-menu.
4.Enter volume 1-8, or adjust using
DOWN/UP keys.
5.Press PROG, to confirm the
setting.
Ring Volume
The ring volume is adjusted by the
following key sequence
16
1.Press PROG
2.Press the DOWN key three times.
3.Press PROG, to enter the ring
volume sub-menu.
4.Enter volume 0..6, or adjust
using DOWN/UP keys. The current
ring tone/melody is played once at
the selected new volume.
5.Press PROG, to confirm the
setting.
Ring pattern
T h e r i n g p a t t e r n o f a n
external/internal incoming call is
changed by the following key
sequence:
1.Press PROG
2.Press the DOWN key four times.
3.Press PROG, to enter the ring
pattern sub-menu.
4 . P r e s s t h e U P / D O W N k e y s
followed by the PROG key to
choose either external or internal
ring pattern setting.
5. Enter setting 0..9, or adjust using
DOWN/UP keys. The selected ring
pattern is played in the fixed
volume level in the buzzer.
6.Press PROG, to confirm the
setting.
Auto Answer
The auto answer feature may be
configured using the menu.
1. Press PROG.
2.Press the DOWN key five times.
3.Press PROG, to enter the auto
answer sub-menu.
4.Enable auto answer by pressing 1
or UP, or disable auto answer by
pressing the 0 or DOWN key The