General Description - Southwestern Bell Freedom Phone GH4000 Owner's Manual

TELEPHONE OPERATION
Page Call
1.The page call function is used as
an aid to locate the handsets.
2.Paging of all handsets is done by
making internal call to all handsets
(INTERCOM, handset number '#')
3.It can be done from both Base and
Handsets. (Press PAGE key to stop
paging from Base.
4.Press Talk key or '0'-'9',*,# to
stop paging from Handset.
Mem

General Description

1.The handsets share a common
Mem, which is stored in the base
station. This means that entries
i n s e r t e d b y o n e h a n d s e t a r e
available for other handsets, and if
one deletes a Mem entry, it will
disappear from all handsets. A
maximum of 10 Mem entries can be
saved.
2.It is possible to abort an initiated
Mem operation by double-clicking
the TALK key
3.The Mem entries are sorted and
p r e s e n t e d t o t h e u s e r i n
alphabetical order.
Characters
N a m e s a r e e n t e r e d u s i n g t h e
numerical keys. Characters are
generated by multiple key presses,
see the table 1.2 . The cursor moves
to the next position if another
numerical key is pressed or by
pressing the UP key. The last
entered character is deleted by
24
pressing DELETE or DOWN. The
entire name is cleared with a long
DELETE key press.
Mem operation
A number can be recalled and
dialed from the Mem by pressing
1.
Press MEM in idle, or scroll
through the sub-menu with the
UP/DOWN keys and press PROG
with "MEM RECALL" in the first
line.
2.Scroll through the Mem entries
using DOWN or UP keys or enter
first character of the searched name
and continue searching using the
scroll keys.
3.TALK to dial the number.
A M e m e n t r y i s e d i t e d b y
pressing
1.Press MEM in idle, or scroll
through the sub-menu with the
UP/DOWN keys and press PROG
with "MEM RECALL" in the first
line.
2.Scroll through the Mem entries
using DOWN or UP keys or enter
first character of the searched name
and continue the search using the
scroll keys.
3. Press PROG, to enter number
e d i t m o d e a n d e n t e r c o r r e c t
number. Press DELETE to erase a
digit. A long DELETE key press
erases the whole number.
4.Press PROG to confirm number
and enter name edit mode.
5.Press DELETE or DOWN to
erase right most character. A long