Summary of Contents for Southwestern Bell GH3040AT
Page 1
LOOK…FOR THE TOLL-FREE “HELP” TELEPHONE NUMBER. LISTEN…AS THE EXPERTS TALK YOU THROUGH THE PROBLEM. For immediate answers to your questions regarding operation, missing parts or installation, call the SOUTHWESTERN BELL FREEDOM PHONE® RETAIL SALES HELP LINE AT: 1-800-366-0937 Monday - Friday 8:30a.m. - 9:00p.m. EST Saturday 8:30a.m.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: SAFETY INSTRUCTIONS FOR BATTERIES Read and understand all instructions. Follow all warnings and instructions marked on the product.
Handset Battery Pack CAUTION: Receiver Volume Use only a Southwestern Bell Freedom Phone® approved battery pack in the handset Switch of your Cordless Telephone. To reduce the risk of fire or injury, always do the following To adjust the receiver when replacing, discarding or charging batteries.
Page 4
LCD Display Indicator Base Unit Controls and Indicators Tone / Pulse Ringer On/Off DC In Telephone Line sets the unit to pulse sets the ringer of the connect the AC connect the telephone New Call / Repeated Call or tone dialing unit to on or off adaptor cord here line cord here...
FCC WANTS YOU TO KNOW INTRODUCTION This equipment complies with Part 68 of the FCC rules and ACTA technical requirements. On the bottom of the base of this equipment is a label that contains, ABOUT THE GH3040 among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment.
INTRODUCTION (CONT.) INSTALLATION Box Contents Desk or Table Installation •Base unit •Telephone line cord 1. Plug the AC adaptor cord into the 9V DC input jack on the Base unit. •Handset with rechargeable battery •AC adaptor with cord 2. Plug one end of the telephone cord into the TEL LINE jack on the Base unit. •Headset •Desk/Wall mounting bracket 3.
INSTALLATION (CONT.) CALLER ID SETUP Handset Battery Charging: To Set Language The battery pack in the handset must be fully charged for about 10-14 hours before 1. After the Handset battery is fully charged, the LCD using the telephone. display will show “SET LANGUAGE”. After connecting to AC power, leave the handset unused in the cradle for ten to 2.
TELEPHONE OPERATION TELEPHONE OPERATION (CONT.) Tone / Pulse Operation Digital Security System 40 Channel AutoScan Making a Call Your cordless telephone will operate on Your cordless telephone is equipped Operation tone or rotary (pulse) systems. with a digital security coding system to Your cordless telephone...
Page 9
TELEPHONE OPERATION (CONT.) TELEPHONE OPERATION (CONT.) Flash Memory Feature To Retrieve Stored Numbers: NOTE: If you experience difficulty with placing or You can use your cordless telephone Your cordless telephone is equipped 1. Pick up Handset. receiving calls, the lost security code with special services such as Call with 10 memories for programming your 2.
CALLER ID OPERATION CALLER ID OPERATION (CONT.) IMPORTANT: (2) 7 digits with a 1 : Receiving a Call Reviewing All Call Records You must subscribe to Call Waiting and If it is necessary to insert a 1 prefix to After the first ring, the caller’s name and 1.
CALLER ID OPERATION (CONT.) TROUBLESHOOTING Caller ID Erase VIP Calls If your telephone is not performing to your expectations, please try these simple steps : To Erase a Single Call Your telephone allows you to create VIP call records. When a VIP call is received, 1.
TROUBLESHOOTING (CONT.) PRODUCT CARE Additional Information A. Avoid putting cordless phones near heating appliances and devices that A. Connecting this telephone to a coin generate electrical noise (motors, operated telephone or party line is Problem Suggestion fluorescent lamps, etc.). prohibited by law. B.
According to FCC regulations, this equipment, which has been certified and registered This Southwestern Bell Freedom Phone® is warranted to the original purchaser to be free by the FCC, may only be repaired by authorized persons. If repairs or adjustments are from defects in materials and workmanship under normal installation, use, and service for a made by an unauthorized person, the FCC certification may be voided.