Lr/Elr Laser Scan Engine; Reader Settings Table; Aim Code Id - Code Characters - CipherLab 8000 Series User Manual

LR/ELR LASER SCAN ENGINE

The tables below list reader settings as well as symbology settings for the Long Range
Laser (LR) or Extra Long Range Laser (ELR) scan engine.

READER SETTINGS TABLE

LR/ELR
Aiming Duration
Decode Time-out
Transmit AIM Code
ID
AIM CODE ID – CODE CHARACTERS
Code Character
A
C
E
F
G
H
I
M
S
X
Description
Decide whether to have the aiming dot. When you press
the [SCAN] button, the scan engine will emit a red dot for
aiming. It will stay on until it times out or you press the
[SCAN] button again. Then, it will emit a scan beam.
0~9, in units of 1 second.
Enter 0 if aiming is not desired.
Set the maximum time for decoding to continue during a
scan attempt.
5~99, in units of 0.1 second.
Decide whether to include AIM Code ID in the beginning of
data. Each AIM Code ID contains the three-character
string "]cm" –
] = Flag Character (ASCII 93)
c = Code Character (see below)
m = Modifier Character (see below)
Code Type
Code 39
Code 128
UPC/EAN
Codabar
Code 93
Code 11
Interleaved 25
MSI
Discrete 25, IATA 2 of 5
Code 39 Trioptic, Bookland EAN
Appendix III
Default
No aiming
3.0 sec.
Disable
105