2D SCAN ENGINE
The tables below list reader settings as well as symbology settings for the 2D scan
engine.
READER SETTINGS TABLE
2D
Focus Mode
Decode Illumination
Aiming Pattern
Decode Time-out
Transmit AIM Code
ID
AIM CODE ID – CODE CHARACTERS
Code Character
A
C
d
E
e
Description
Select the focus mode to control the working range:
Far Focus – optimized to read at its far position
Near Focus – optimized to read at its near position
Smart Focus – toggles the focus position after every
frame
Decide whether to flash illumination on every barcode
capture to aid decoding.
Turn On (Internal LED )
Turn Off
Decide whether to project the aiming pattern during
barcode capture.
Turn On
Turn Off
Set the maximum time for decoding to continue during a
scan attempt.
5~99, in units of 0.1 second.
Decide whether to include AIM Code ID in the beginning of
data. Each AIM Code ID contains the three-character
string "]cm" –
] = Flag Character (ASCII 93)
c = Code Character (see below)
m = Modifier Character (see below)
Code Type
Code 39, Code 39 Full ASCII, Code 32
Code 128, Coupon (Code 128 portion)
Data Matrix
UPC/EAN, Coupon (UPC portion)
GS1 Databar Family
Appendix IV
Default
Far Focus
On
On
3.0 sec.
Disable
111