Emulation Application Template - CipherLab 8000 Series User Manual

STREAM Wireless Studio

1.3.2 EMULATION APPLICATION TEMPLATE

EMULATION TEMPLATE SETTINGS
Source
Terminal Type
Host Source
Enable runtime barcode
setting / Set RFID Reader
Font Size & Case
Small / Large The mobile computer screen size varies. Display capability, as shown in the table
below, depends on the screen size as well as the font you use. The font size
OR
setting affects the default horizontal/vertical steps the cursor move at one time
on the host screen.
Local Setting /
Fixed Size
34
User Guide
Select your terminal type.
Select a host source associated with the above terminal type.
If your source supports ANSI/VT, proceed to configure VT
Emulation Settings.
If your source supports 5250, proceed to configure TN
Emulation Settings.
Select whether to enable runtime barcode setting as well as
RFID setting.
By default, small font (6x8) is applied. Data coming in from the host will be
displayed accordingly. You may select to use large font (8x16).
For 9400/9500 Series, select "Fixed Size" or leave it to "Local Setting" to