Throttle/Shift Cable - Mercury SKI Instruction Manual

Throttle/Shift Cable

Lubricate cable ends and barrels and then attach to engine and transmission.
IMPORTANT: When installing throttle cable, be sure that cables are routed in such a
way as to avoid sharp bends and/or contact with moving parts. DO NOT fasten any
items to throttle cable.
ATTACHING/ADJUSTING THROTTLE CABLE - CARBURETED MODELS
1. Lubricate cable ends and barrels.
2. Place remote control throttle lever in idle position and attach cable end guide to carbure-
tor throttle lever as shown.
3. Grasp cable behind barrel and push lightly as shown. Adjust cable barrel to align hole
with anchor stud, then slide barrel onto stud.
a -
b -
c -
d -
e -
g -
h -
d
c
b
Cable End Guide
Throttle Lever Stud
Elastic Stop Nut and Washer
Spacer
Cable Barrel
f - Anchor Stud
Washer
Elastic Stop Nut
GASOLINE ENGINES SKI MODELS
e
g
a
d
h
f
INDEX
22552
Page 25 of 48