Remote Control Unit - Pioneer PDP-5080HD Operating Instructions Manual

Part Names

Remote control unit

This section describes the functions of the buttons available
when the mode switch has been set to TV. For the buttons for
controlling other equipment, see Using the remote control unit to
control other devices starting from page 84.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Mode switch
(with "TV" selected)
1 TV a: Turns on the power to the plasma display or places it
into standby mode.
2 Transmission confirmation LED
3 INPUT: Selects an input source of the plasma display.
("INPUT 1", "INPUT 2", "INPUT 3", "INPUT 4", "INPUT 5",
"INPUT 6" and "INPUT 7")
4 SCREEN SIZE: Selects the screen size.
5 AV SELECTION: Selects audio and video settings. (AV source:
OPTIMUM, STANDARD, DYNAMIC, MOVIE, GAME, USER.
PC source: STANDARD, USER.)
6 INFO: Displays a channel banner when a TV program is being
watched.
When the TV Guide On Screen™ system is in operation, displays
information about the currently highlighted channel (if available).
7 HOME MENU: Displays the HOME MENU screen.
MENU: Displays a panel menu when the TV Guide On Screen™
system is in operation.
8 DAY +/–: Jumps to the next or previous day of program listings
in the TV Guide On Screen™ Listing service.
9
/ / / : Selects a desired item on the menu screen.
10 HDMI CONTROL: Displays the HDMI Control menu.
11 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels. See page 43 for details
to set the FAVORITE CH.
While watching, you can toggle the set channels by pressing A,
B, C and D.
12 0 to 9: Selects the channel.
13 •(dot): Enters a dot.
14 CH +/–: Selects the channel.
15 SPLIT: Switches the screen mode among 2-screen, picture-in-
picture, and single-screen.
16 FREEZE: Freezes a frame from a moving image. Press again to
cancel the function.
17 MTS: Selects MTS/SAP or language depending on the program
being watched.
18 ANT: Selects the antenna (A, B). See page 24 for details.
19 PC: Selects the PC terminal as an input source.
20 DISPLAY: Displays the channel information.
21 TV GUIDE: Displays the TV Guide On Screen™ system.
22 ENTER: Executes a command.
23 PAGE +/– (for the TV Guide On Screen™ system): Scrolls the
program listing screen vertically.
24 RETURN: Returns to the previous menu screen.
25 CH ENTER: Executes a channel number.
26 CH RETURN: Returns to the previous channel. This button is
disabled while the TV Guide On Screen™ system is displayed.
27 VOL +/–: Sets the volume.
28 M MUTING: Mutes the sound.
29 SHIFT: Moves the location of the small screen when in the
picture-in-picture mode.
30 SWAP: Switches between the two screens when in the 2-screen
or picture-in-picture mode.
Luminous remote control buttons
All buttons on the remote control unit are luminous and gather
and store light. This enables quick access to the desired
function when performing operations in dark places.
Note
• When using the remote control unit, point it at the plasma
display.
• See pages 78 to 87 for operating buttons not listed on this
page.
04
15
En