Pioneer PDP-5080HD Operating Instructions Manual page 34

TV Guide On Screen™ System Setup
07
System Setup Screens
Screen 1: Select Country
• This screen asks you the location of your TV.
• Press / to highlight a country.
• Press ENTER to make the selection.
• Press to highlight Next.
• Press ENTER to display Screen 2.
Screen 2: Enter ZIP or Postal Code
• If you selected USA in Screen 1, you see the ZIP Code screen.
• Input ZIP Code by either
• pressing the number keys or
• pressing / to scroll through numbers, and then
move to the next character field and Next.
• You can select the Back button from any screen to return to the
previous setup screens to correct or review the information you
entered.
• Press ENTER to display Screen 3.
• If you selected Canada in Screen 1, you see the Postal Code
screen.
• Input Postal Code by pressing
numbers) and then
to highlight Next.
• Press
• Press ENTER to display Screen 3.
34
En
/ to scroll through letters (or
to move to the next character field.
Screen 3: Select service(s)
• Press / to highlight the connected video source(s) for
which you would like to receive show listings.
• Press ENTER to make your selection(s).
• Press to highlight Next.
• Press ENTER to go to Screen 4.
Note
• If you do not have cable service, you must select Antenna in
order to receive a channel lineup and listings.
Screen 4: Which input terminal is the system plugged into?
• Select "ANT/CABLE A IN" or "ANT B IN" and you see Screen 5.
to