Quick Start Installation - VBrick 9000 Getting Started Manual

Quick Start Installation

The following topics explain how to quickly set up and configure the VBrick 9000 Encoder.
The information here is also contained and is interchangeable with the Quick Start Guide that
comes packaged with the encoder. Either may be used.
Before proceeding, open the box and inspect the components. Each shipment comes with
the components in the table below.
VBrick 9000 Encoder
VBrick 9000 Encoder
Quick Start Guide
Power supply and cable
Serial cable and adapter
Ethernet cable
HDMI cable and adapters 1 per channel
A/V breakout cables
The encoder is shipped with all appropriate cables and connectors. The encoder(s) you
purchased may vary slightly from the illustration(s) depicted below but the basic elements are
common to all encoders regardless.
Figure 1. Quad Channel Encoder (no SDI)
Figure 2. Dual Channel Encoder (with SDI)
Part
HDMI
Encoder Getting Started
Number
1 per order
1 per order
1 per encoder
1 per encoder
1 per encoder
1 per slot
Description
High Definition Multimedia Interface that transmits uncompressed
digital data.
Chapter 2
9