Vbdirectory; Command Line Interface - VBrick 9000 Getting Started Manual

VBDirectory

A management application called VBDirectory provides quick reference and access to all
VBrick encoders on a network. VBDirectory v4.4 or higher is compatible with encoders.
VBDirectory is automatically installed with a software upgrade and is also available on the
VBrick Support Downloads site.
The VBDirectory User Guide is also included on the VBrick Documentation site.

Command Line Interface

VBrick encoders can be configured using a standard ASCII terminal or terminal emulator
program connected to the serial port ( ) on the rear of the encoder. The MIB-based CLI
COM 1
can be used to access all VBrick parameters. (Keep in mind that all parameters that are
available in the MIB-based CLI are also available in the Web-based VBAdmin application.
Always use VBAdmin unless you have a compelling reason to use the command line.)
28 © 2016 VBrick Systems, Inc.