Change the Function Key Labels
You can use CLI (or a script) to modify Function key labels (F1–F4). Each of the following
commands is associated with a specific function key. Replace the bolded text below with a
meaningful label that describes the script. Do not exceed 20 characters including spaces.
svar "vbrickFrontPanelUserFunctionDescription.1=F1 label"
svar "vbrickFrontPanelUserFunctionDescription.2=F2 label"
svar "vbrickFrontPanelUserFunctionDescription.3=F3 label"
svar "vbrickFrontPanelUserFunctionDescription.4=F4 label"
svar vbrickFrontPanelApplySet=2
56
© 2016 VBrick Systems, Inc.