Vbadmin; Using Vbadmin - VBrick 9000 Getting Started Manual

VBAdmin

Using VBAdmin

The VBrick encoder has an integrated management interface (VBAdmin) that lets you
manage configuration from an external browser. This allows network managers to remotely
configure and monitor the encoders from virtually anywhere. You can launch VBAdmin in
Internet Explorer or Firefox (other browsers are not supported by VBrick). Connect to
VBAdmin by pointing to the IP Address (for example:
encoder and logging in. (Note that passwords passed between client and server are
encrypted.) VBAdmin is one of several ways you can manage the VBrick encoder (for
example you can also use Telnet or the Command Line Interface) but VBAdmin is the easiest
to use.
To login to an encoder with Microsoft Internet Explorer, you must have
Active Scripting
or
Security Privacy
and password will refresh the screen without login. If
check with your system administrator to see if it was disabled at the server level. To avoid
having the VBAdmin window automatically close when accessing a different VBrick encoder,
go to Tools > Internet Options > Advanced and uncheck the
.
shortcuts
For details on using VBAdmin, see: VBrick 9000 Encoder v4.4 Admin Guide
Encoder Getting Started
enabled. Depending on your browser version, these settings are in the
tabs in
Internet Options
http://192.168.5.5
. If either option is disabled, a correct username
Active Scripting
Reuse windows for launching
Chapter 6
) of the VBrick
and
Session Cookies
cannot be enabled,
35