VBrick 9000 Getting Started Manual page 25

Table 1. LCD Message Sequence
Sequence Message
1
VBrick Systems
Release x.x.x
IP xxx.xxx.xxx.xxx
Host Name/MAC Address
2
Edit Mode
3
Limited Run Mode
Video Input Problems
4
Program x (1–4)
Multicast
Unicast
Served
5
RX x Connected
Program Name
Output Format/Frame Rate
6
POST Errors
Table 2. Backlight Color Definitions
State
Normal
Error
Warning
Encoder Getting Started
Description
Basic information (including user description, IP
address, host name/MAC address) is enabled by
default and always present unless disabled in
VBAdmin.
An Edit message is displayed when an Edit session is
in progress.
Warning messages are displayed if present.
Encoder messages are displayed if an encoder is
present. They show program information for each
configured transmitter and server.
Decoder messages are displayed if a decoder is
present. They show receiver connected, program
name, and output format/frame rate.
Error messages, if present, are shown last.
Backlight
Light Blue
Red
Yellow
Quick Start Installation
17