D-Link DGS-1210-10 Manual page 109

4 Web-based Switch Configuration
IPv6 Class (0-255): Specifies the class of access rule. The field range is from 0 to 255.
ICMPv6 Type: Sets the ICMP Type field as an essential field to match.
Code (0-255): Sets the ICMP code field as an essential field to match.
Source IPv6 Address: Defines the range of source IP addresses, relevant to the ACL rules. For example, to
set 2002:0:0:0:0:0:b0d4:0, use mask 128.
Destination IPv6 Address: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128.
Action: Specifies the ACL forwarding action matching the rule criteria. Permit forwards packets if all other
ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Next button then the ACL profile is added.
•
To define the IPv6 ACL TCP profile: Select IPv6 ACL with TCP of Protocol Type and click Next
button. The updates to show the follows:
Figure 4.129 - Add Access Rule – IPv6 ICMP
102
D-Link Smart Managed Switch User Manual