Snmp > Snmp > Snmp View; Snmp > Snmp > Snmp Community - D-Link DGS-1210-10 Manual

4 Web-based Switch Configuration
AuthPriv – Both authorization and encryption are required for packets sent between the Switch and
SNMP manger.
Notify View Name: Specifies a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
SNMP > SNMP > SNMP View
This page allows you to maintain SNMP views to community strings that define the MIB objects which can be
accessed by a remote SNMP manager.
View Name: Name of the view, up to 32 characters.
Subtree OID: The Object Identifier (OID) Subtree for the view. The OID identifies an object tree (MIB tree)
that will be included or excluded from access by an SNMP manager.
OID Mask: The mask of the Subtree OID. 1 means this object number is concerned, 0 means do not
concerned. For example 1.3.6.1.2.1.1 with mask 1.1.1.1.1.1.0 means 1.3.6.1.2.1.X.
View Type: Specifies the configured OID is Included or Excluded that a SNMP manager can access.
Click Add to create a new view, Delete to remove an existing view.
SNMP > SNMP > SNMP Community
This page is used to maintain the SNMP community string of the SNMP managers using the same
community string are permitted to gain access to the Switch's SNMP agent.
Community Name: Name of the community string
User Name (View Policy): Specifies the read/write or read-only level permission for the MIB objects
accessible to the SNMP community.
Figure 4.142 – SNMP > SNMP > SNMP Group Table
Figure 4.143 – SNMP > SNMP > SNMP View
114
D-Link Smart Managed Switch User Manual