Alfa Romeo 4C Alpine Radio 2018 Manual page 81

80 BLUETOOTH HANDS FREE CALLING
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1. Using your BLUETOOTH compatible device, select
the "Alpine CD Receiver" for pairing.
2. Turn the Rotary encoder to change the head unit
display from "Pairing NO" to "Pairing YES", and then
press /ENTER.
If "Pairing NO" is selected, the connection will be
canceled.
3. If the pairing was successful, "Connected" is dis-
played for a few seconds. The head unit then returns
to its previous state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1. Using your BLUETOOTH compatible device, select
the "Alpine CD Receiver" for pairing.
2. Input the passcode ("0000") in a BLUETOOTH com-
patible device.
NOTE:
• The passcode is fixed as "0000".
3. If the pairing was successful, "Connected" is dis-
played for a few seconds. The head unit then returns
to its previous state.
NOTE:
• If the connection is unsuccessful, "Failed" is displayed.
• After a successful pairing, the two devices should
reconnect automatically whenever the vehicle's igni-
tion is turned ON. If the auto connection fails, try to
reconnect manually.
• Set "Visible Mode" to ON to enable this unit to be
recognized by a BLUETOOTH compatible device, refer
to "Setting the Visible Mode".
• You can also manually pair the BLUETOOTH devices
from this unit. For details, refer to "Pairing a
BLUETOOTH Device from the unit".
Auto Pairing With A iPod/iPhone
When an iPod/iPhone is connected to the USB port, the
unit will automatically pair with it.
1. Make sure USB PAIR is set to ON. Refer to "Setting the
Auto Pairing with iPod/iPhone".
2. Connect an iPod/iPhone to this unit's USB port.