Presetting Stations Automatically; Tuning To Preset Stations; Frequency Search Function - Alfa Romeo 4C Alpine Radio 2018 Manual

24 RADIO

Presetting Stations Automatically

1. Press BAND repeatedly until the desired radio band is
displayed.
2. Press and hold TUNE/A.ME for at least two seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into preset
buttons 1 to 6 in order of signal strength. When the
automatic memory has been completed, the tuner goes
to the station stored in preset location No.1.
NOTE:
• If no stations are stored, the tuner returns to the station
you were listening to before the auto memory proce-
dure began.

Tuning To Preset Stations

1. Press BAND repeatedly until the desired band is
displayed.
2. Press any one of the station preset buttons (1 through
6) that has your desired radio station in memory.
The display shows the band, preset number and
frequency of the station selected.

Frequency Search Function

You can search for a radio station by its frequency.
1. Press /ENTER in Radio mode to activate the
search mode.
2. Turn the Rotary encoder to select the desired fre-
quency. *
* Operation is not required when Listen Mode is set to
Analog (refer to "Switching The Listening Mode").
3. Turn the Rotary knob to select the desired frequency.
4. Press /ENTER to receive the selected frequency.
NOTE:
• Press
in the search mode to cancel. Or, the search
mode will be canceled if no operation is performed
for 60 seconds.