Initial System Start-Up - Alfa Romeo 4C Alpine Radio 2018 Manual

18 GETTING STARTED
3. Grasp the front panel firmly, slide to the left (1), and
then pull to remove (2).
NOTE:
• The front panel may become hot in normal usage
(especially the connector terminals on the back of the
front panel). This is not a malfunction.
• To protect the front panel, place it in the supplied
carrying case.
• When detaching the front panel, do not apply exces-
sive force as it may result in a malfunction.
• Do not leave the front panel open, or drive the car with
the panel open as it may result in an accident or
malfunction.
Attaching
1. Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit (1).
2. Push the left side of the front panel until it locks firmly
into the main unit (2).
NOTE:
• Before attaching the front panel, make sure that there
is no dirt or dust on the connector terminals and no
foreign objects between the front panel and the main
unit.
• Attach the front panel carefully, holding the sides of
the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

NOTE: Be sure to press the RESET button when using the
unit for the first time, after changing the car battery, or
using the battery disconnect (anytime the vehicle loses
power).