Confirming The Strength Of The Siriusxm Signal; Setting Tunestart - Alfa Romeo 4C Alpine Radio 2018 Manual

1. Press and hold AUDIO/SETUP for at least two sec-
onds to activate the SETUP mode.
2. Turn the Rotary encoder to select "SiriusXM", and
then press / ENTER.
The SiriusXM setup mode is activated.
3. Turn the Rotary encoder and select Parental Lock and
press / ENTER.
4. Turn the Rotary encoder to select either Clear All, Locked
Channels or Edit Code, and press
NOTE:
• Keep a note of the numbers somewhere safe in case
you should forget it.

Confirming The Strength Of The SiriusXM Signal

You can check the signal strength through this setting item.
• Setting item: Signal IND
Signal content
Setting IND
Setting Indicator:
This menu item displays the SiriusXM signal strength
as Strong, Good, Weak or No Signal.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 121
NOTE:
• If the Signal Indicator reports Weak or No Signal and
your vehicle is parked outside with no obstructions to
the southern sky, then your SiriusXM antenna may not
be properly installed or may have become damaged.

Setting TuneStart

With the TuneStart feature turned ON, you will hear the
beginning of the song when you tune to one of your
Preset music channels from the current band of presets. It
/ ENTER.
may take a minute or two for the feature to work after
power up or after changing preset bands.
Setting item: TUNE START
Setting contents:
OFF / ON (Initial setting)
OFF: When set to OFF, TuneStart mode is unavailable.
ON: When ON, selecting a SmartFavorites or Preset
Channel will automatically start the currently song from
the beginning, depending on the channel content type.
Pressing BACK will return to live satellite radio.
NOTE: Displayed only when SiriusXM Tuner-SXV200 or
later is connected.
10