Checking The Siriusxm Radio Id Number; Storing Channel Presets; Tuning Channels Using Presets - Alfa Romeo 4C Alpine Radio 2018 Manual

Table of Contents

Advertisement

122 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED

Checking The SiriusXM Radio ID Number

To subscribe to the SiriusXM Satellite Radio service, it is
necessary to locate and identify the Radio ID of your
SiriusXM Tuner. The Radio ID contains 8 characters and
can be found on the bottom of your SiriusXM Tuner or
can be displayed on when selecting Channel 0 by follow-
ing the steps below:
1. While in the Satellite Radio Mode, press
select channel "0".
The unit displays "RADIO ID" and ID number at the
same time.
NOTE:
• The Radio ID does not include the letters I, O, S or F.
2. To cancel the ID number display, select a channel other
than "0".

Storing Channel Presets

1. Press BAND to select the desired band you want to
store the preset in.
There are 3 Satellite Radio Preset bands.
Each press of BAND changes the band: SiriusXM1 →
SiriusXM2 → SiriusXM3 → SiriusXM1
2. Tune to the desired channel, and then press and hold
(for at least two seconds) one of the preset buttons
(1 through 6) to store the channel.
The display then shows the stored Band and preset
number (for example, SiriusXM1-3 is shown when
preset 3 of BAND1 is selected).
3. Repeat the procedure to store up to 5 other channels
onto the same band.
or
to
NOTE:
• A total of 18 channels can be stored in the preset
memory, 6 Channels for each band (SiriusXM1,
SiriusXM2 and SiriusXM3).
• If you store a new channel into a preset which already
has a channel assigned, the current channel will be
cleared and replaced with the new one.

Tuning Channels Using Presets

1. Press BAND to select the desired band of Presets you
wish to access.
2. Press the preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in memory.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alpine radio

Table of Contents