Itunes Radio Tagging - Alfa Romeo 4C Alpine Radio 2018 Manual

130 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED

iTunes Radio Tagging

iTunes Tagging lets you tag songs heard on SiriusXM
channels. Use this unit in conjunction with an optional
SiriusXM Tuner and a Tagging compatible iPod/iPhone
to tag the music that you listen to. This tag information is
automatically transferred to your iPod/iPhone. Later,
when your iPod/iPhone is connected to iTunes, you can
preview, buy and download your tagged songs. For
details, refer to the Owner's Manual of the Tagging
compatible iPod/iPhone.
The Tag indicator will light when a song playing on a
SiriusXM channel has tag information available.
Press and hold VIEW for at least two seconds to
save its tag information.
During tagging, the TAG indicator blinks.
If no iPod/iPhone is connected, "Tag Count X" is dis-
played (X is the total amount of the tag information
stored in this unit).
NOTE:
• During tagging, the iPod/iPhone takes priority to save
the tag information. If no iPod/iPhone is connected,
the tag information is saved to this unit.
• When the memory of iPod/iPhone is full, "iPod Full"
and "Tag Count X" are displayed. The tag information
will be stored to the unit.
• If the operation is failed, "Cannot Tag" is displayed.
• This unit can store up to 50 tagged songs. When the
memory of the unit is full, "Tag Count50" and
"Memory Full" are displayed.
• When an iPod that doesn't support the tagging func-
tion is connected, "Non-Tagging iPod" is displayed.
• When the iPod/iPhone is disconnected from the unit
during tagging, its tag information will be stored in the
unit.
• If there is stored tag information on the unit, when an
iPod/iPhone supporting the tag function is connected,
the stored tag information will be transferred to the
iPod/iPhone automatically. When the iPod/iPhone
memory becomes full, "iPod Full" will be displayed,
and any remaining tag information on the unit will not
be transferred to the iPod/iPhone.
• If tag information already exists, "Already Tagged"
will be displayed when you try to tag information
again.