Display Setting - Alfa Romeo 4C Alpine Radio 2018 Manual

72 SETUP
STANDBY: Quit the demonstration mode. Note that if
this unit is disconnected from the vehicle's battery, the
next time you use this unit the DEMO mode will be ON.
OFF: Quit the demonstration mode completely.

Display Setting

Display is selected on the setup main menu in step 2.
Changing Lighting Color
You can change the lighting color of the unit's buttons.
Setting item: ILLUMINATI
Further setting items: KEY & DISP( Key & Display ) /
KEY ( Key ) / DISP* ( Display )
Setting contents:
OPTION / CUSTOMIZE
OPTION: A total of 30 colors can be selected.
CUSTOMIZE: If there is no color you prefer in OPTION,
you can customize the color as follows.
* You can change the lighting colour of keys and display
simultaneously or respectively by selecting KEY or KEY/
DISP.
1. After entering CUSTOMIZE, turn the Rotary encoder
to select a color (RED, GREEN, BLUE) you want to
adjust, and then press ENTER.
2. The adjusted color will blink, turn the Rotary encoder
to select a value (0-60).
R is red, G is green and B is blue.
3. Press ENTER or BACK to finish the color setting.
4. Repeat steps 1 to 3 to set another color.
NOTE:
• In step 2, you can switch to another color setting mode
by pressing SEEK UP or SEEK DOWN.
• The setting values in OPTION mode and CUSTOMIZE
mode are linked, when the setting value in CUSTOM-
IZE is different from the one in OPTION, "USER" will
be displayed in OPTION mode.
• During CUSTOMIZE setting, at least one setting value
should be greater than 20.