2. When the error indication remains after ejecting, press
the
button again.
If the error indication still does not turn off after
pressing the
button for a few times, consult your
authorized dealer.
• When "Error" is displayed:
If the disc cannot be ejected by pressing
RESET switch (refer to "Initial System Start-Up" on
page 18) and press
again. If the disc still cannot be
ejected, consult your authorized dealer.
Protect
• A copy-protected WMA file was played back.
– You can only play back non-copy-protected files.
Unsupported
• A sampling rate/bit rate not supported by the unit is
used.
– Use a sampling rate/bit rate that is supported by the
unit.
No Support
• An AAC format disc is inserted.
– Change to a disc of a supported format.
• Text information that is not recognizable by the unit is
being used.
• Change the text information to text that is supported
by the unit.
Flash Memory Messages
Error
, press the
• Communication error or other error.
– You can solve the problem by switching the source,
turning ACC off/on, or turning power off/on.
Error-01
• Communication error.
– You can solve the problem by switching the source,
turning ACC off/on, or turning power off/on.
Error-04
• Abnormal current is run to the USB Flash Memory
device.
– You can solve the problem by turning ACC off/on,
or turning power off/on.
ADDITIONAL INFORMATION 137
11