To reset the system, perform the following procedure:
1. Turn off the unit.
2. Press
(OPEN) to open the front panel, and then
remove it.
3. Press RESET button (1) with a ballpoint pen or similar
pointed object.
Adjusting Volume
Turn the Rotary encoder until the desired sound level is
obtained.
Setting The Dimmer Control
Press and hold DIM for at least two seconds to select the
DIMMER mode.
DIMMER AUTO → DIMMER ON → DIMMER OFF →
DIMMER AUTO
DIMMER AUTO Mode:
Decrease the illumination of the unit's buttons while the
vehicle headlights are ON. The unit's backlighting will
decrease with headlight usage.
DIMMER ON Mode:
Keep the illumination of the backlighting dimmed.
DIMMER OFF Mode:
Keep the illumination of the backlighting bright.
NOTE: The setting items are the same as DISPLAY
setting in SETUP mode. For details, refer to "Dimmer
Control".
Setting The Time
1. Press and hold AUDIO/SETUP for at least two sec-
onds to activate the SETUP selection mode.
GETTING STARTED 19
2