Audio Setup - Alfa Romeo 4C Alpine Radio 2018 Manual

NOTE:
• If no operation is performed for five seconds after
selecting the SubW LEVEL, BASS, TREBLE, BAL-
ANCE, FADER, DEFEAT or VOLUME mode, the
unit automatically returns to normal mode.
2. Turn the Rotary encoder until the desired sound is
obtained in each mode.
NOTE:
• By setting DEFEAT ON, previously adjusted level
settings of BASS and TREBLE will return to the
factory defaults.

Audio Setup

You can flexibly customize the unit to suit your own
preference and usage. From the AUDIO SETUP menu,
Audio Setting can be modified.
Use steps 1 to 5 to select the category you wish to
modify. For details on how to change each setting, see
the following sections below.
1. Press and hold AUDIO/SETUP for at least two sec-
onds to activate the SETUP mode.
2. Turn the Rotary Encoder to select Audio, and then
press /ENTER.
3. Turn the Rotary Encoder to select the desired sound
setting menu, and then press
EQ PRESETS*1/*2/*3 ↔ BASS ENGIN*4/*5 ↔
PARAMETER*5/*6 ↔ 9BAND P-EQ*1/*3/*7 ↔
SOURCE VOL ↔ X-OVER*1/*3 ↔ SUBWOOFER*8 ↔
SUBW PHASE*9 ↔ SUBW SYS*3/*9 ↔ LENGTH*1 s
TCR*1 ↔ POWER IC ↔ MX SETTING*1/*3 ↔ EQ
PRESETS
*1 Adjustment cannot be performed when DEFEAT is
set to ON.
*2 Any changes made to either EQ PRESETS or
9BAND P-EQ are reflected in the others' settings.
*3 These items are not adjustable in BASS ENGINE SQ
mode. If you want to adjust these items separately,
follow the confirm message and select "YES" to exit
BASS ENGINE SQ mode, then make the setting.
*4 Not displayed when the Audio Setup mode is
activated by pressing BASS.
*5 Not displayed when 2WAY /3WAY system mode is
set to 3WAY.
SOUND SETTING 39
/ENTER.
6