Wireless Speaker System - Pioneer XW-DV1WS Operating Instructions Manual

Additional information
Problem
Considerable noise in
radio broadcasts
(continued).
Auto tuning does not
pick up some stations.
Sound is mono only.

Wireless speaker system

Problem
Audio cannot be
received.
Audio is interrupted.
Audio is suddenly
interrupted.
No sound from the
wireless speaker.
Remedy
• Connect an outdoor FM antenna (see Connecting external antennas on
page 59).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 59).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• Not applicable to the European model – The tuning interval is incorrect for
your country or region. Try switching the tuning interval (frequency step) (see
Frequency step setting on page 66).
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 26).
Remedy
• The radio wave reception is variable depending on locations due to
the effects of obstacles and reflecting objects. Try changing the
location of the wireless speaker system a little.
• The transmitter and wireless speaker are designed and sold as a
pair, and they identify each other in communication. This means that
communication is not available between separately purchased
transmitter and wireless speaker.
• This system uses high frequency radio waves that have properties
similar to light, such as linearity, reflection, refraction, diffraction,
and interference. Therefore, placement of the system can result in
weak radio waves and/or interruption.
• The distance between the transmitter and wireless speaker may be
too large. Use the wireless speaker within the reach of the radio
waves (within 10m) from the transmitter.
• The system is being used in a location with radio wave interference
or electrical noise. If so, the unit may need to be relocated.
• There may be radio communication equipment using the same
frequency band (2.4 GHz) as this system, such as a Bluetooth device,
radio LAN device or microwave oven, operating nearby.
• If you selected W.Stereo, the volume on the wireless speaker may
be turned down too low.
13
75
En