Switching The Tv Audio Input From Scart To Rca; Using This Unit With A Pioneer Plasma; Display - Pioneer XW-DV1WS Operating Instructions Manual

Other connections
Switching the TV audio input from
SCART to RCA
You can set the TV audio input to RCA or
SCART.
1 Press TV.
2 Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons
to select 'TV Audio?'.
4 Press ENTER.
5 Use the (cursor up/down) buttons
to select SCART or RCA.
6 Press ENTER
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV or
monitor.
Pin
Assignment
No.
1 Audio R OUT 12
2 Audio R IN
3 Audio L OUT
4 GND (audio)
5 GND (video)
6 Audio L IN
7 B OUT
Pin
Assignment
No.
No
connection
13 GND (video)
14 GND (video)
15 R or C OUT
16 BLANK OUT
17 GND (video)
18 GND (video)
Pin
Assignment
No.
8 Status
9 GND (video)
10 No
connection
11 G OUT
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG or (European
model only) PDP-504HDE and PDP-434 HDE),
you can use an SR+ cable (see note below) to
connect it to this unit and take advantage of
various convenient features, such as
automatic video input switching of the plasma
display when the input is changed.
Media receiver
CONTROL
OUT
Pioneer plasma display
IN
CONTROL
FM
ANTENNA
UNBAL 75Ω
AV CONNECTOR
The illustration above shows the European
model.
Pin
Assignment
No.
19 Video or Y
OUT
20 No
connection
21 GND (video)
XV-DV525
AM
LOOP ANTENNA
12
63
En