Using The Timer; Setting The Wake-Up Timer; Turning The Wake-Up Timer On/Off - Pioneer XW-DV1WS Operating Instructions Manual

08

Using the timer

Chapter 8
Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
Important
• The clock must be set to the correct time
for the wake-up timer to work properly (see
Setting the clock on page 19).
STANDBY/ON STANDBY/ON
CD CD FM/AM FM/AM
DVD DVD TUNER TUNER
FRONT
SURROUND
8
1 3
4
7
DVD MENU
TUNE+ TUNE+
ST– ST–
ENTER ENTER
TUNE– TUNE–
MUTE
MASTER
VOLUME
TV CONTROL
1 Select the source you want played.
For example, press TUNER (FM/AM on the
front panel) to select the radio as your source.
2 Prepare the source.
For example, tune in the radio station you want
to wake up to.
48
En
L1/L2 L1/L2 TV CONTROL
TV TV LINE LINE
CH VOL
INPUT
OPEN CLOSE
0
¡
BASS MODE DIALOGUE CH LEVEL
SURROUND ADVANCED VIRTUAL SB
4
PROGRAM REPEAT RANDOM
AUDIO SUBTITLE ANGLE
HOME
RETURN
ZOOM TOP MENU
MENU
1 2 3
QUIET/
SYSTEM
TEST TONE MIDNIGHT
SETUP
ST+ ST+
4 5 6
TIMER/ TIMER/
DIMMER
DISPLAY CLOCK CLOCK
7 8 9
SOUND
SR+ FOLDER– FOLDER+
0
ENTER
CLR
WIRELESS
ROOM SETUP
MAIN SUB SUB
3 Set the volume.
4 Press TIMER/CLOCK twice to reach the
timer menu.
5 Use the (cursor left/right) buttons
to select 'Wake-Up?' then press ENTER.
6 Use the (cursor left/right) buttons
to select 'TimerEdit' then press ENTER.
7 Set the switch-on time.
Use the (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you're
done.
8 Set the switch-off time.
Use the (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you're
done.
After pressing ENTER this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system is
left on!
Tip
• You can check the timer settings in
standby by pressing TIMER/CLOCK twice.
(Press TIMER/CLOCK once to display the
current time.)

Turning the wake-up timer on/off

If the wake-up timer is on, it will switch on the
system everyday at the time you have set.