Additional Information; Optional System Settings; System Setup Menu Options In; Standby - Pioneer XW-DV1WS Operating Instructions Manual

Additional information

Chapter 13
Additional information

Optional system settings

These settings are accessed by using the
System Setup menu while in standby.
FRONT
SURROUND OPEN CLOSE
0
8
1 3 ¡
4 4
7
DVD MENU RETURN
TUNE+
ST– ST+
ENTER ENTER
TUNE–
MUTE SOUND
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons
to choose the setting you want to adjust
then press ENTER.
The current setting is shown for each option as
you cycle through the display. See below for a
full list and description of each.
4 Use the (cursor up/down) buttons
to adjust the setting.
5 Repeat steps 2 and 3 to make other
settings.
6 Press ENTER to confirm.
System Setup menu options in standby
Below are all the available settings in the setup
menu. The first setting in each section is the
default. See also the notes in each section for
additional information about the settings.
BASS MODE DIALOGUE CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM REPEAT RANDOM
AUDIO SUBTITLE ANGLE
HOME
ZOOM TOP MENU MENU
1 2 3
QUIET/
SYSTEM SYSTEM
SETUP SETUP TEST TONE MIDNIGHT
4 4 5 6
TIMER/
DIMMER
DISPLAY CLOCK
7 8 9
SR+ FOLDER– FOLDER+
0
ENTER
CLR
WIRELESS
ROOM SETUP
MAIN SUB SUB
Wireless speaker setting
See Using the wireless speaker system on
page 27.
Child lock setting
The Child Lock feature is useful when you've
set the wake-up timer and don't want the
system switched on before it activates.
• Lock On – Makes the front panel buttons
and controls inoperative.
• Lock Off – Restores regular use of the
front panel buttons and controls.
Clock format setting
Specifies how the clock is displayed:
• 12-Hour – Sets the clock to show in 12-
hour format in the display.
• 24-Hour – Sets the clock to show in 24-
hour format in the display.
TV attenuator setting
If the source connected to the TV analog input
is producing distortion through the speakers,
the attenuator will reduce the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
Line attenuator setting
If the source connected to the LINE analog
input is distorting, the attenuator can reduce
the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
13
65
En