Settings
Setting Delay
Sometimes a user might pause before replying
to a transmission. To avoid missing a reply on
a specific channel, the scanner automatically
programs a 2-second delay into any channel or
frequency.
Depending on the operation mode, follow one of
these steps to turn the delay on or off.
•
To turn off the 2-second delay, press
•/DELAY while the scanner is monitoring
a channel, scanning, or searching. DLY
disappears.
•
To turn on the 2-second delay for a single
channel, manually select the channel and
press •/DELAY. DLY appears.
•
To turn on the 2-second delay for the search
function, press •/DELAY while the scanner
is searching. DLY appears and the scanner
automatically adds a 2-second delay to
every frequency it stops on in that band.
The Signal Stalker I delay time is 10 seconds.
Turning Banks On or Off
You can turn each channel-storage bank on and
off. When you turn off a bank, the scanner does
not scan any of the 50 channels in that bank.
1. In Scan Mode, Press FUNC +
2. Press
or
10-19, or SS Log).
3. Press the number key (0 - 9) that corresponds
to the bank you want to turn on or off. A black
box indicates the bank is turned on. An empty
box indicates the bank is turned off.
to select a set of banks (00-09,
35
Settings
/BANK.