Gree GWC36LB-D1NNA2A/I Service Manual page 71

Steps
10.Remove motor
Remove the screws used for fixing the motor,
pull out the motor wire and pull it outward, and then
remove the motor
11.Remove motor support
Remove the screws used for fixing the motor
support, pull it upward and then remove the
motor support
12.Remove four-way valve and air intake pipe
Release the refrigerant completely, unsolder the
air intake pipe of compressor, outlet pipe of
condenser, connecting pipe of gas valve and
gas and liquid separator, then pull the four-way
valve and air intake pipe.
68
Procedure
motor
motor support
Removal Procedure
four-way valve