Gree GWC36LB-D1NNA2A/I Service Manual page 19

7 HEALTH SAVE:
Press HEALTH part of this button to turn on or off HEALTH function.
Pressing SAVE part of this button,
mode. Press SAVE part of the button again to cancel SAVE function .During SAVE
operation, the tmperature and fan speed is not adjustable.
:
8
●
Press
defaults to simple swing condition.
●
Press + button and
simple swing and static swing,
In static swing condition, press
●
changes as below:
●
If the unit is turned off during swing operation,the louver will stop at present position.
9
X-FAN:
Pressing X-FAN button in COOL or DRY mode,the icon "X-FAN" is displayed and the
indoor fan will continue operation for 10 minutes in order to dry the indoor unit even though
you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or
HEAT mode.
10 TEMP:
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the indoor unit firstly
power on it will display the setting temperature, if the temperature's displaying status is changed from other status to"
the ambient temperature, 5s later or within 5s, it receives other remote control signal that will return to display the setting tempera-
ture. if the users haven't set up the temperature displaying status,that will display the setting temperature.
11 TIMER:
Press TIMER button at unit ON to set TIMER OFF, HOUR OFF blinking. Press TIMER
button at unit OFF to set TIMER ON, HOUR ON blinking. In this case, pressing + or -
button changes time setting. Holding down either button rapidly changes time setting
(time setting range 0.5-24hours). Press TIMER button again to confirm setting, HOUR
O
N/OFF stopping blink. If there is not any
HOUR ON/OFF blinking, TIMER setting will be canceled.
12
TURBO:
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed. (This function is not applicable for some models).
16
button to start or stop left & right swing function.The remote controller
button at the same time at unit OFF to switch between
is displayed and the unit goes into SAVE operation
blinking 2 seconds..
button, the swing angle of left & right louver
operation of button within 5 seconds during
Function and Control
(Not available for this mode)
",displays