Gree GWC36LB-D1NNA2A/I Service Manual page 65

Steps
10. Remove motor
Remove the screws used for fixing the motor,
pull out the motor wires, pull it outward and then
remove the motor.
11. Remove motor support
Remove the screws used for fixing the motor
support, pull it upward and then remove the
motor support
12. Remove air intake pipe, discharge pipe and
connecting pipe
Release refrigerant, unsolder the air inlet, air
outlet and the connecting pipe of gas valve, and
the connecting pipe on gas and liquid sep arator,
then pull the sub-assy upwards.
62
Procedure
motor
Removal Procedure
motor support
connecting pipe