Ucs Standard Client Login - iPECS eMG80 Administration Manual

Hide thumbs Also See for eMG80:

Table of Contents

iPECS eMG80 & eMG800 & UCP

Administration and Programming Manual

4.4.15.2 UCS Standard Client Login – PGM 446

Selecting UCS Standard Client Login will display the UCS standard client login input page. Enter

the Client index and click [Load] to modify the Client data. Use the check boxes to indicate the

attributes to modify. Click [Save] button after changing Value.

Enter UCS Client Index : eMG80: 1-32 / eMG800: 1-200 / UCP: 1-200

The UCS Client information is configured for each client prior to registration. When the UCS

Server is employed to provide Premium service, iPECS system will transfer the information to the

server after the client registers and, after registration, any changes to the client configuration are

accomplished in the UCS Server.

The station number for the UCS Client can be assigned here

Station Number

and will update PGM 103 and 443.

The UCS Client Id for the UCS Client can be assigned here

and will update PGM 103 and 443.

The UCS Client password, up to 32 characters must be

The user's name, up to 32 characters should be entered.

Office Phone

Set Office phone number.

Cellular Phone

Set Cellular phone number.

Set Home phone number.

Set Office name.

Office Department Set Office Department.

Email address

Set Email address.

If the UCS Client is part of a Linked pair, it must be enabled

here. By entering the Station number of iPECS IP Phone as

the UCS Client Station Number, the stations will employ MAC

Figure 4.4.15.2-1 UCS Standard Client Login

Table 4.4.15.2-1 UCS Standard Client Login

Min. 4 characters

Max. 32 characters

Max. 40 characters