iPECS eMG80 Administration Manual page 208

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual
Table 3.3.9.15-1 DIGIT CONVERSION TABLE ATTRIBUTES (PGM 270)
BTN ATTRIBUTE/DISPLAY
7
01/001 D1/T1 CHANGED
.......................
8
01/001 D1/T2 CHANGED
.......................
9
01/001 D1/T3 CHANGED
.......................
10
01/001 D2/T1 CHANGED
.......................
11
01/001 D2/T2 CHANGED
.......................
12
01/001 D2/T3 CHANGED
.......................
13
01/001 D3/T1 CHANGED
.......................
14
01/001 D3/T2 CHANGED
.......................
15
01/001 D3/T3 CHANGED
.......................
16
01/001 RING MODE TBL
(00–15) : 0
17
01/001 APPLY OPTION
(0–3): ALL
18
01/001 ARS CO ACCESS CO
. . . . . . . .
DESCRIPTION
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 1 and
time zone is 1.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 1 and
time zone is 2.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 1 and
time zone is 3.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 2 and
time zone is 1.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 2 and
time zone is 2.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 2 and
time zone is 3.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 3 and
time zone is 1.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 3 and
time zone is 2.
The dialed digits are converted to this
digit stream when Apply Time type is
'FOLLOW LCR' and day zone is 3 and
time zone is 3.
The dialed digits are converted
according to the auto ring mode time.
The Apply Option can be applied
according to the caller.
If a selected path is not available for
some reason (All Busy, Line Fault etc.)
after digit conversion, Alternative
Route Selection (ARS) will connect
calls using predefined designated ARS
digit in digit conversion table.
193
Issue 1.6
RANGE DEFAULT
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
Max. 24 digits
00-15 0
0. All All
1. Reserved
2. CO Line
3. Disable
Max. 8 Digits