Group System Units; Function Group Configuration; Function Group - Endress+Hauser Proline Promass 83 Manual

3 Block MEASURED VARIABLES
14
3.2

Group SYSTEM UNITS

3.2.1

Function group CONFIGURATION

MEASURED
⇒
A
VARIABLES
MEASURED VARIABLES → SYSTEM UNITS → CONFIGURATION
You can select the units for measured variables in this function group.
!
Note!
The units selected here have no effect on the fieldbus. They are only used for the local display and for assigned
instrument functions.
UNIT MASS FLOW
(0400)
UNIT MASS
(0401)
Device Functions Proline Promass 83 FOUNDATION Fieldbus
MEASURING VALUES
⇓
SYSTEM UNITS
Function description
Use this function to select the unit for displaying the mass flow (mass/time).
The unit you select here is also valid for:
• Switching points (limit value for mass flow, flow direction)
• Low flow cut off
Options:
Metric:
Gram → g/s; g/min; g/h; g/day
Kilogram → kg/s; kg/min; kg/h; kg/day
Ton → t/s; t/min; t/h; t/day
US:
Ounce → oz/s; oz/min; oz/h; oz/day
Pound → lb/s; lb/min; lb/h; lb/day
Ton → ton/s; ton/min; ton/h; ton/day
Factory setting:
Depends on country (kg/h or US-lb/min)
Use this function to select the unit for displaying the mass.
The unit you select here is also valid for:
• Pulse weighting (e.g. kg/p)
Options:
Metric → g; kg; t
US → oz; lb; ton
Factory setting:
Depends on country (kg or US-lb)
!
Note!
The unit of the totalizers is independent of your choice here. The unit for each totalizer
is selected separately for the totalizer in question.
AAA
⇒
ACA CONFIGURATION
Endress+Hauser
040