Group System Units - Endress+Hauser Proline t-mass 65F Manual

Device Functions Proline t-mass 65
Endress+Hauser
3

Group SYSTEM UNITS

You can select the unit for the measured variable in this function group.
UNIT MASS FLOW Use this function to select the unit for displaying the mass flow (mass/time).
The unit you select here is also valid for:
• Current outputs
• Frequency output
• Switching points (limit value for mass flow)
• Low flow cut off
!
The following units of time can be selected:
s = second, m = minute, h = hour, d = day
Options:
Metric:
gram
kilogram
Metric ton
US:
ounce
pound
ton
For arbitrary units (see function TEXT ARBITRARY MASS on Page 12)
_ _ _ _
Factory setting:
kg/h or US lb/h (country dependent, → Page 71 ff.)
!
If you defined a unit for mass in the SPECIAL UNIT function group (see Page 12) the unit
in question is shown here.
UNIT MASS Use this function to select the unit for displaying the mass.
The unit you select here is also valid for:
• Pulse value (e.g. kg/p)
Options:
Metric
US
For free selectable units
(see function TEXT ARBITRARY MASS on Page 12)
Factory setting:
kg or US lb (country dependent, → Page 71 ff.)
!
If you defined a unit of mass in the SPECIAL UNIT function group (see Page 12) the unit
in question is shown here.
The unit for the totalizer is independent of your choice here, it is selected separately in
the TOTALIZER group (see Page 21).
Function description SYSTEM UNITS
Note!
→
g/time unit
→
kg/time unit
→
t/time unit
→
oz/time unit
→
lb/time unit
→
ton/time unit
→
_ _ _ _/s: _ _ _ _/min; _ _ _ _/h; _ _ _ _/day
Note!
→
g; kg; t
→
oz; lb; ton
→
_ _ _ _
Note!
3 Group SYSTEM UNITS
9