Parameters - Siemens SIMATIC ET 200SP Manual

4.2

Parameters

AI 8xU BA parameters
The effective range of the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with an ET 200SP CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning the parameters in the user program, the "WRREC" instruction transfers the
parameters to the module using data records, see section Parameter assignment and
structure of the parameter data record (Page 25)).
The following parameter settings are possible:
Table 4- 2 Configurable parameters and their defaults (GSD file)
Parameter
Diagnostics:
No supply voltage L+
Diagnostics:
Overflow
Diagnostics:
Underflow
Type/range of meas-
urement
Smoothing
Analog input module AI 8xU BA (6ES7134-6FF00-0AA1)
Manual, 03/2015, A5E34941660-AA
Range of values
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Deactivated
•
Voltage +/- 10 V
•
Voltage 0 to 10 V
•
None
•
Weak
•
Medium
•
Strong
•
Default Reconfigura-
tion in RUN
Disable Yes
Disable Yes
Disable Yes
Voltage (+/- 10 Yes
V)
None Yes
Parameters/address space
4.2 Parameters
Effective range with configura-
tion software, e.g. STEP 7
(TIA Portal)
GSD file GSD file
PROFINET PROFIBUS DP
IO
Module Module
Module Module
1
Module
Channel Channel
Channel Channel
13