Siemens SIMATIC ET 200SP Manual page 22

Technical specifications
6.1 Technical specifications
Address area
Address space per module
Address space per module, max.
Analog inputs
Number of analog inputs
Maximum permitted input voltage for voltage input
(destruction limit)
Cycle time (all channels), min.
Input ranges (rated values), voltages
0 to +10 V
Input resistance (0 to 10 V)
-10 V to +10 V
Input resistance (-10 V to +10 V)
Cable length
Shielded, max.
Formation of analog values for the inputs
Integration and conversion time/resolution per
channel
Resolution with overrange (bit including sign),
max.
Integration time configurable
Interference voltage suppression for interference
frequency f1 in Hz
Conversion time (per channel)
Measured value smoothing
Number of steps
Configurable
Encoders
Connection of the signal transmitters
For voltage measurement
For current measurement as 4-wire transducer
Errors/accuracies
Linearity error (in relation to input range), (+/-)
Temperature error (in relation to input range), (+/-) ± 0.005%
Crosstalk between inputs, min.
Repeat accuracy in settled state at 25 °C (in rela-
tion to input range), (+/-)
Operational limit in the entire temperature range
Voltage in relation to input range, (+/-)
Basic error limit (operational limit at 25 °C)
Voltage in relation to input range, (+/-)
Interference voltage suppression for f = n x (f1 +/-
1%), f1 = interference frequency
Series-mode interference (peak of the interference
< rated value of the input range), min.
22
6ES7134-6FF00-0AA1
16 bytes
8; single-ended
30 V
1 ms; per channel
Yes; 15 bits
100 kΩ
Yes; 16 bits including sign
100 kΩ
200 m
16 bits
Yes
16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
ms; 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75)
4; none; 4/8/16 times
Yes
Yes
No
± 0.01%
50 dB
± 0.05%
± 0.5%
± 0.3%
70 dB; with conversion time 67.5 / 22.5 / 18.75
ms: 40 dB
Analog input module AI 8xU BA (6ES7134-6FF00-0AA1)
Manual, 03/2015, A5E34941660-AA