SMA SUNNY SENSORBOX Installation Manual page 6

System monitoring

Hide thumbs Also See for SUNNY SENSORBOX:

Table of Contents

General Warnings

General warnings

All electrical installations must be done in accordance with the local and

National Electrical Code

CSA C22.1. This document does not and is not intended to replace any local, state,

provincial, federal or national laws, regulation or codes applicable to the installation and

use of the system monitoring unit, including without limitation applicable electrical safety

codes. All installations must conform with the laws, regulations, codes and standards

applicable in the jurisdiction of installation. SMA assumes no responsibility for the

compliance or noncompliance with such laws or codes in connection with the installation

of the system monitoring unit.

Before installing or using the Sunny SensorBox, read all of the instructions, cautions, and

warnings on the Sunny SensorBox in this installation guide.

Wiring of the Sunny SensorBox must be made by qualified personnel only.

Sensorbox-eng-IA-IUS-112515

ANSI/NFPA 70 or the Canadian Electrical Code

SMA America, LLC

Installation Manual

Table of Contents