SMA America, LLC
Mounting the RS485 Power Injector
1. Determine the mounting location based on the amount of available space.
DANGER
Drilling into live cables.
Death or serious injury due to electric shock.
• Before drilling the holes, check whether electricity cables run through the walls at the
desired mounting location. If cables run through the walls at the desired mounting
location, then select a different mounting location.
2. Mark the position of the drill holes using the wall
mounting bracket as a guide.
3. Drill holes with a diameter of
marked points and insert the wall anchors.
4. Attach the wall mounting bracket to the wall with two
screws.
Installation Manual
1
⁄
in. (6 mm) at the
2
Mounting the device
Sensorbox-eng-IA-IUS-112515
33