SMA SUNNY SENSORBOX Installation Manual page 59

SMA America, LLC
4. Plug the ground cable into the terminal.
5. Make sure the gasket of the cable gland is properly seated.
6. Screw the lock nut onto the cable gland with a torque of 7 in‑lbs. (0.8 Nm) to fix the ground
cable.
Mounting Plate or roof bracket
7. Screw the cable lug with ground cable onto the mounting plate or roof bracket.
☑ The Sunny SensorBox is grounded.
You can connect the Sunny SensorBox to the SMA Power Injector with Bluetooth.
Installation Manual Sensorbox-eng-IA-IUS-112515
Startup
59