SMA SUNNY SENSORBOX Installation Manual page 42

Startup
4. Connect the sensor on the "F7: TmpMdul" terminal of
the Sunny SensorBox. The polarity of the cables is
arbitrary.
5. Make sure the gasket of the cable gland is properly seated.
6. Screw the lock nut onto the cable gland with a torque of 7 in‑lbs. (0.8 Nm) to fix the cable.
7. Securely lay the cable using suitable fastening material.
☑ The module temperature sensor is connected.
You can now connect additional sensors or connect the Sunny SensorBox via the RS485 Power
Injector or the SMA Power Injector with Bluetooth and turn it on.
42 Sensorbox-eng-IA-IUS-112515
SMA America, LLC
Installation Manual